< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=230556370762678&ev=PageView&noscript=1" />
Dec 26, 2022 Leave a message

Chenille's Spinning Principle

1. Conveying and positioning of core wire

 

In the spinning process, the core wire is divided into upper core wire and lower core wire. Under the action of the traction roller, they are unwound from the package and fed together. Under the action of the roller piece and the spacer piece, the upper and lower core wires are placed on both sides of the feather yarn and in the middle of the feather yarn.

 

 

2. Introduction and Cutting of Feather Yarn

 

Feather yarn is composed of two or three single yarns. The single yarn is unwound from the package and twisted with the high-speed rotation of the rotary head, which increases the clustering of the feather yarn; At the same time, it is wound on the spacer sheet to form a yarn loop. The yarn loop slides downward with the rotation of the roller sheet. When it meets the blade, it is cut into short feathers. These short feathers, together with the upper core wire, are sent to the control roller to join with the lower core wire. In this way, the feather yarn is sandwiched between the two cores and enters the twisting area.

 

page-473-454

3. Twisting and forming

 

With the high speed rotation of spindle, the core wire is rapidly twisted, and the down yarn is firmly combined with the twisted core wire to form a plump chenille yarn; At the same time, it is wound on the bobbin to form tube yarn.

Send Inquiry