The quality requirements of chenille yarns are getting higher and higher

The quality requirements of chenille yarns are getting higher and higher. At present, when making chenille yarns, two knitting yarns are input at the same time. The chenille yarns made in this way will be slightly bundled. Sawtooth shape; if single yarn input is used for wool yarn, this question will be avoided, but the application of single yarn input must double the speed of the reversing head, and the current bearing speed and bearing capacity base cannot achieve this. Requirements. In addition, in the current environment where employment is becoming more and more difficult, enterprises' efforts to ease the adversity of employment by increasing output are also hindered by the fact that the rotation speed of the reversing head does not meet the requirements. In normal manufacturing, the two bearings in the reversing head are often worn out due to 24 hours of non-stop high-speed operation. Therefore, the workload of the mechanics to replace the bearings is relatively large, and because the bearings are worn out when the wear is not found. This has an effect on the linear density of the yarn. Therefore, the rotation speed of the reversing head used to be the neck and neck to improve the yield and quality of chenille yarns. Finding the means and skills to improve the rotation speed of the reversing head can improve the yield and quality of chenille yarns.