In fact, the production process of cashmere scarves and wool scarves is the same. Simply put, it can be divided into four major steps.
1, Staining
(1) Stained with loose hair. When this product is in large quantities, it usually requires loose hair dyeing. The advantage is that it has a "blending" process, and the color of the cashmere after blending is uniform.
(2) Yarn dyeing. Some products are grid shaped, and in fact, only one or two kilograms of yarn are needed for a single insert. The insert is very thin, while the spinning wheel is very large. In this case, the spinning wheel needs thirty kilograms of cashmere to fill the wheel, which is very expensive. Therefore, yarn dyeing and spinning white yarn have emerged, which requires a few kilograms to dye several kilograms.
2, Just now, we mentioned the issue of minimum order quantity for dyeing. Once the dyed wool is ready for spinning, the general minimum order quantity is 30 kilograms, which is the basic minimum order quantity. The more, the better, which involves the issue of loss rate. There are many types of spinning carts, which can be simply divided into fine spinning and coarse spinning. Fine spun yarns with over 24 counts in the process are called fine spinning, including single yarn and ply yarn.
3, The yarn that has been woven can be woven on the weaving machine. In fact, there is another process before this, which is "warping", with vertical warp and horizontal weft. That is to say, first sort out the warp yarn and put it on the weaving machine to weave the weft yarn. If the weaving machine is familiar to everyone, I won't go into too much detail.
4, Post processing is a very complex process, which involves inspecting, repairing, kneading, washing, shrinking, fuzzing, drying, steaming, cutting, labeling, and packaging the fabric. There are approximately 60 steps to produce the finished product. Due to time constraints, I won't go into too much detail. Everyone can simply look at the pictures.





